Roy Foundation Pros logoRoy Foundation ProsFoundation Repair · Roy, UT
Menu
piering and underpinning in Roy, UT

Roy Foundation Pros

Piering and Underpinning in Roy, UT

Piering and underpinning in Roy, UT: steel and helical piers, hydraulic lifting, free written estimates.

Serving Roy and nearby communities.

Roy sits on the kind of mixed clay and sand soil that holds water in spring and shrinks hard come late summer. Footings poured into that kind of ground in the 1970s and 80s weren't engineered for today's drainage patterns, and that's why underpinning calls spike every spring once the snowmelt finishes soaking in.

Roy Foundation Pros drives piers to stable strata below that active soil layer, not just deeper into the same moving clay. It's the difference between a repair that holds and one that's back on the schedule in three years.

What's included

What's Included with Piering and Underpinning

Typically included

  • Load assessment to determine pier count and spacing
  • Access excavation at each pier location, not a full perimeter dig
  • Steel or helical pier installation to load-bearing depth
  • Hydraulic lift to raise the foundation toward original grade

Optional

  • Interior finish repair where pier access runs through a finished basement wall
  • Landscape restoration beyond basic backfill and grading

Customer prep

  • Clear vehicles and stored items from the work perimeter
  • Flag sprinkler lines or buried utilities you know about near the foundation

How it works

How Our Piering and Underpinning Process Works

  1. Load Assessment photo
    Step 1

    Load Assessment

    Roy Foundation Pros maps where the structure's weight actually needs support.

  2. Access Excavation photo
    Step 2

    Access Excavation

    Small pits open along the foundation, spaced to the engineered pier plan.

  3. Pier Driving photo
    Step 3

    Pier Driving

    Steel or helical piers go down past Roy's shifting surface clay to stable ground.

  4. Load Transfer photo
    Step 4

    Load Transfer

    Brackets lock each pier to the footing so the structure's weight moves off the bad soil.

  5. Leveling Adjustment photo
    Step 5

    Leveling Adjustment

    Hydraulic jacks bring the foundation up in controlled, measured increments.

  6. Site Restoration photo
    Step 6

    Site Restoration

    Backfill and compaction return the yard to its original grade.

Materials

Materials and Methods for Piering and Underpinning

  • Steel Push Piers photo

    Steel Push Piers

    Rated for the heavier loads typical of Roy's full-basement homes, driven well past the active soil zone.

  • Helical Piers photo

    Helical Piers

    Torque-driven for additions and lighter structures where variable soil depth is the bigger concern.

  • Underpinning Brackets photo

    Underpinning Brackets

    Hold pier and footing together so seasonal frost movement can't separate the connection.

  • Hydraulic Lift Systems photo

    Hydraulic Lift Systems

    Allow slow, controlled elevation changes instead of a single forced jack.

  • Galvanized Coatings photo

    Galvanized Coatings

    Protect steel piers against corrosion in Roy's damp spring soil conditions.

  • Compacted Fill Material photo

    Compacted Fill Material

    Packed around new piers to keep the surrounding ground from re-settling.

FAQs

Piering and Underpinning FAQs

How long does underpinning take, and can I stay in the house during it?

Most residential jobs run two to four days depending on pier count. Yes, you can stay in the house. The work happens at the foundation perimeter, not inside living space.

How many piers does a typical Roy home need?

It depends on the footprint and how much settlement is involved, anywhere from four to a dozen piers on a standard single-family foundation. The load assessment nails down the exact number.

Is underpinning the same as foundation repair?

Underpinning is one method within foundation repair, specifically for structural settlement. Crack injection and wall stabilization are different methods for different problems.

Do I need a permit for piering?

Structural underpinning usually needs plan review through Weber County or the city permit counter since it changes how the foundation carries load. Roy Foundation Pros handles that filing.

Will piering fix a bowing basement wall too?

Not directly. Piering addresses vertical settlement. A bowing wall usually needs anchors or carbon fiber straps, which is wall stabilization, a separate but related fix.

Before & after

Before and After Piering and Underpinning

  • piering and underpinning in Roy, UT
    Before
  • piering and underpinning in Roy, UT
    After

Next step

Get a Piering and Underpinning Estimate in Roy

Roy Foundation Pros can tell you in one visit whether your settlement calls for piers. Call (435) 319-7024 or request a free estimate. More background on related fixes at Foundation Repair or back to Home.

Timeline

How Long Does a Piering and Underpinning Take?

A straightforward residential job moves through these stages:

  1. 01

    Consult and load assessment

    same day
  2. 02

    Written quote

    1–2 days
  3. 03

    Permit approval

    1–2 weeks
  4. 04

    Pier installation and lift

    2–4 days
  5. 05

    Backfill and grading

    same day

    as final install

Need a schedule that fits?

Get a Free Estimate

Ask about Piering and Underpinning

Tell us about the project and how to reach you.

Call (435) 319-7024